WEAVING
PROCESSING
SPINNING
KNITTING
OTHERS
EMBROIDERY
POLYSTER PLANT
WOOL & WORSTED
NONWOVEN PLANT
NARROW - WEAVING / FINISHING
KNOTTING MACHINE
HOT DEAL
LAZZATI FABRIC DOUBLING
  YARN
  FABRIC
Products -> PROCESSING

Search in PROCESSING
Please enter the part or complete name of Machine and avail required list of the machines within the category PROCESSING
Show machines which are Used New Both

List of all products in PROCESSING
After you complete selection View selected products
   2 LAIP air flow dyeing machines mod., yoc 2011
No Image
2 LAIP air flow dyeing machines mod., yoc 2011 model FLOW-98 GRADI, type SBRUFF 1 CORDA, single rope, inverter drive, Sedomat 1800 controller
Reference code:  07-1916-07112015
 
   1 x used SANFORIZING - Compacting and shrinking line for woven fabric in open width
No Image
1 x used SANFORIZING - Compacting and shrinking line for woven fabric in open width - Manufacturer Paganini - Rollers width: 2000 mm - Working width: 1800 mm - Rubber conveyor belt width 1900 mm thickness 60 mm - introduction by entry frame with fabric braking device - Unit of fabrics preparation not-stop complete with: drawing cylinder, brushing, cradle with accumulation effect non-stop, fabric braking device - Brushing machine brand Co.Ri.Me - Entry frame with fabric braking device - fabrics vaporizing chamber with suctioning device - N° 2 cylinders steam heated at the exit of the fabrics vaporization chamber, suitable to eliminate any excess moisture on the fabric - Mini stenter for the accompanying the fabric to the unit of shrinkage - Unit fabric shrinkage unit with rubber conveyor belt - felt calender with double drum for increased production - delivery fabric in plait with cradle with accumulation effect not-stop - Weft straightener with pins wheels, Brand Bianco, Model Tramatex, yoc 1993 - Rolling machine with chain for fabric guide with delivery fabric in small roll, brand Co.Ri.Me - Pictures available upon request.
Reference code:  20-1101-07102015
 
   1 MENSCHNER inspecting/rolling/batching/plaiting machine year 1992
No Image
1 MENSCHNER inspecting/rolling/batching/plaiting machine year 1992, rollerwidth 2400mm working width 2200 mm, type MMS, hydraulic drive, input from any carrier/trolley/bigbatch, illuminated inspecting table, meter counter, delivery with photocell on rolls or bigbatch or plaiter, fabric tension and speed both adjustable, suitable for terry fabrics (woven as well as knitted).
Reference code:  02-1221-07082015
 
   1 MATTHYS inspecting rolling machine working width 2000mm
No Image
1 MATTHYS inspecting rolling machine working width 2000mm, year approx 2000, inspection table with light, metercounter, Hyperbel rolling system for fabric roll diameter max 800mm, excellent condition.
Reference code:  02-1221-07082015
 
   1 Monforts Montex 6500 4F Twinner stenter frame
No Image
1 Monforts Montex 6500 4F Twinner stenter frame, ww. 2200 mm, yoc 2012 - for knitted fabrics 4 chambers, horizontal pin chain, gas heated, Monforts padder, Mahlo weft straightener, extented entry, steamer, glueing and cutting selvedge device, exit plaiter and non-stop rolling machine
Reference code:  07-1916-07082015
 
   SANFORIZING MACHINE MONFORTS, type MONFORTEX, year 1996, w.w. 1800 mm
No Image
SANFORIZING MACHINE MONFORTS, type MONFORTEX, year 1996, w.w. 1800 mm, high entry with E+L guides, humidity device, steaming cylinder, sanfor, palmer diameter cilinder 2000 mm + 800 mm, ( w.w. felt 1600 mm ) cooling cylinder, exit plaiter and A-frame. Electrical pannel with inverters. Addition grinding device in box. Complete documentation. In working condition. Sanfort rubber must be changed.
Reference code:  19-0409-07082015
 
   1993-2000 COMPLETE OPEN WIDTH FABRIC DYEING AND PRINTING PLANT
No Image
1993-2000 COMPLETE OPEN WIDTH FABRIC DYEING AND PRINTING PLANT
Reference code:  20-0621A-07082015
 
   KUSTERS PAD BATCH 1988
No Image
KUSTERS PAD BATCH 1988 . YOC 1988 - Model: 222.11-1800 - Roller Width:2.000 mm. Working Width: 1.800 mm. So composed: N.1 fabric unwinding – Dyeing padder Kusters - N.2 cooling cylinders - Fabric winder with Jbox
Reference code:  09-0521A-05072015
 
   KUSTERS PAD BATCH 2000.
No Image
KUSTERS PAD BATCH 2000. YOC 2000 - Mod.222.11-1800 - R.w.2.000 mm. - W.w. 1.800 mm So composed: Fabric Entry Frame with 2 cooling cylinders Ramallumin - Kusters Bath padder with small tank and equal pressure adjustable. - Automatic Washing - Big winder
Reference code:  09-0521A-05072015
 
   KUSTERS CYLINDERS MERCERIZING RANGE 1996/2002 .
No Image
KUSTERS CYLINDERS MERCERIZING RANGE 1996/2002 . YOC 1996 – 2002 Model Type :E Commerce- Roller Width 2.000 mm. W.w. 1.800 mm. Entrance from JBox with Kusters impregnation Padder - Chemical product dispatch tanks - Cylinder Mercerizing bed – 7 mt - Squeezing padder - Chain Drum for stabilization - Cylinder Mercerizing bed – 7 mt. - Squeezing padder - N.2 Inox Steel MEANDER Washing Unit type 234.43 Cloth content 15 mt each with realtiva padder linear pressure 50N/mm. - Double Winder with JBox - Group preparation of water, caustic soda with tanks and mixer - Mettalic frame - Electric and Control Panel.
Reference code:  09-0521A-05072015
 
   A complete Jet Cloth Dying Unit. YEAR 1997.
No Image
A complete Jet Cloth Dying Unit. YEAR 1997. Here is the detail of ATYC DYING UNIT brand. Location: EUROPE. The equipment for jet consists of: - 2 Rapidsuau – 2000 Type FL – 300 of 300 Kg. capacity approx. With Microrecord II fully automatic microprocessor, with two special heat exchangers with a large heating surface and coupling set for working both machines together or separately. - 1 Rapidsuau – 2000 Type FL – 300 of 300 Kg. capacity approx. With Microrecord II fully automatic microprocessor, with special heat exchanger with a large heating surface. - 1 Laboratory Rapidsuau – 2000 Type FLB – 30 of 30 Kg. capacity approx. With Microrecord – II fully automatic microprocessor, with special heat exchanger with a large heating surface. - 1 – SAMIT – Automatic detwisting and opening machine, fabric squezzer with compensator pan. Face width 1600 mm, and Plaiter of two taction rollers, three guiding rollers in steel, covered with rubber strip.
Reference code:  09-0521A-05072015
 
   Maximum working width: cms 360
No Image
01 - Maximum working width: cms 360 Capacity: kgs 1500 OBSA automation system Maximum working width: cms 180/190 Capacity: kgs 700 OBSA AUTOMATION SYSTEM
Reference code:  09-0521A-05072015
 
   MEZZERA JIGGER VGJ
No Image
MEZZERA JIGGER VGJ: N°01- Maximum working width: cms 190, YEAR 1992 Capacity: kgs 700 OBSA automation system.
Reference code:  09-0521A-05072015
 
   STENTER FAMATEX” j-box
No Image
STENTER FAMATEX” j-box kusters foulard Artos 3 compartments belt pre-dryer. Steam heating Mahlo weft straightener 10 compartments Famatex stenter (clips/pins - 20 methane burners - maximum fabric width cms 185 - Mahlo full moist/temperature control) Mahlo exit weft straightener non-stop fold + big roll exit
Reference code:  09-0521A-05072015
 
   Lafer raising unit mod. GRI 90 24+36 double drums - year 1998 –
No Image
- Lafer raising unit mod. GRI 90 24+36 double drums - year 1998 – With entrance. - Lafer raising unit mod. GRV 90 24+24 double drums - year 1991 - Lafer raising unit mod. GRV 90 24+24 double drums - year 1991 - Lafer raising unit mod. GRV 90 24+24 double drums - year 1991 - Lafer shearing unit year 1991 - with exit Complete air suction system, width cms 175.
Reference code:  09-0521A-05072015
 
   KUSTER Padder for pad-batch washing, bleaching, desizing processes
No Image
KUSTER Padder for pad-batch washing, bleaching, desizing processes Working speed up to 100 mt/min Can be installed in line after singeing Description: Ceia metal detector device Dust suction 500 liters impregnation/saturation compartment Padder Roller 4 various size inox tanks
Reference code:  09-0521A-05072015
 
   MAHLO WEFT STRAIGHTENER MOD. RMFC-10P, YEAR 1998, WIDTH 400CM.
No Image
MAHLO WEFT STRAIGHTENER MOD. RMFC-10P, YEAR 1998, WIDTH 400CM. Model ORTHOMAT RMFC-10 P SERIAL N. 22/636P/20268 YEAR 1998 Entrance weft straightener equipped with 6 optical heads mod. 590 P, 2 motorized curved cylinders plus 2 motorized diagonal cylinders diameter mm 140-150 Exit control device equipped with 4 optical heads mod. 590 P for fully integrated control. Entrance operating keyboard and monitor Exit operating keyboard and monitor CE label
Reference code:  09-0521A-05072015
 
   ARTOS STENTER, WIDTH 400CM ,Year: 1968
No Image
ARTOS STENTER, WIDTH 400CM ,Year: 1968 Big rolls hydraulic unwinder No padder Mahlo weft straightener mod. RMFC-10P year 1998 (suitable width cms 400). 5 chambers stenter (suitable width cms 450) – gas heating Big roll + fold exit (inverter controlled).
Reference code:  09-0521A-05072015
 
   STENTER BRAND FAMATEX with kusters foulard, YEAR 1979,
No Image
STENTER BRAND FAMATEX with kusters foulard, YEAR 1979, Artos 3 Chambers belt pre-dryer. Steam heating, Mahlo weft straightener, 10 Chambers, Famatex stenter (clips/pins - 20 GASS burners – maximum fabric width cms 185 - Mahlo full moist/temperature control) ,Mahlo exit weft straightener ,fold + big roll exit.
Reference code:  09-0521A-05072015
 
   ROTARY PRINTING MACHINE FOR SALE:
No Image
ROTARY PRINTING MACHINE FOR SALE: ROTARY printing machine, Manufacturer Reggiani machines Model : Futura Year 1991 (stopped 1994 to 2001) N ° 10 colors Working Width : 180 cm Printing ratio from 64 to 102 Introduction with carpet type relaxation (also for stretch fabrics) with selvedge aligner and scrubber dust. Scaldina Steam Pan x can use water-soluble glue alternative to permanent Print heads each provided n ° 10 of its feed pump and electric meter of the color content of the printing cylinder. 4 drying gas fields with possibility 3 steps (which we never used), with output plaiter.
Reference code:  09-0521A-05072015
 
   KD DECATIZING MACHINE
No Image
KD DECATIZING MACHINE Make: TMT Made in Italy Year: 1992 Type: P2 2000-1203 Medium PERMANENT FINISHING Working width: 1800mm Entry with Corino Weft Starightner type FLC2 with Pin Wheel Number of Flanges: 3 Feeding into decatizing Autoclave Exit with Plaiter 380v, 50hz
Reference code:  09-0913-05072015
 
   LAIP AIRFLOW DYEING MACHINES, YEAR 2011
No Image
2 X LAIP AIRFLOW DYEING MACHINES, YEAR 2011 Dear Sir We are pleased to offer subject to remain unsold: 2 x AIR FLOW DYEING MACHINES Make: LAIP Year: 2011 Model: FLOW-98 GRADI Type: SBRUFF 1 CORDA Single Rope Inverter Drive Control Type: SEDOMAT-1800 380v, 50hz
Reference code:  09-0913-05072015
 
   A complete Jet Cloth Dying Unit. YEAR 1997.
No Image
A complete Jet Cloth Dying Unit. YEAR 1997. Here is the detail of ATYC DYING UNIT brand. The equipment for jet consists of: - 2 Rapidsuau – 2000 Type FL – 300 of 300 Kg. capacity approx. With Microrecord II fully automatic microprocessor, with two special heat exchangers with a large heating surface and coupling set for working both machines together or separately. - 1 Rapidsuau – 2000 Type FL – 300 of 300 Kg. capacity approx. With Microrecord II fully automatic microprocessor, with special heat exchanger with a large heating surface. - 1 Laboratory Rapidsuau – 2000 Type FLB – 30 of 30 Kg. capacity approx. With Microrecord – II fully automatic microprocessor, with special heat exchanger with a large heating surface. - 1 – SAMIT – Automatic detwisting and opening machine, fabric squezzer with compensator pan. Face width 1600 mm, and Plaiter of two taction rollers, three guiding rollers in steel, covered with rubber strip.
Reference code:  09-0521A-05072015
 
   CONE DYEING MACHINES
No Image
CONE DYEING MACHINES: MASTER BM 300, 400 Kg, Rack with 43 Bars. Max operating pressure main body: 5 Maximum operating temperature of main body:204C° Max operating pressure coil :16 Maximum operating temperature of serpentine::204C° Capacity main body 4085 liters. Capacity 65 liters of serpentine Try IDR Date 12/03/1999, YEAR 1999 Brand POZZI, 680 Kg. Max operating pressure main body: 5 Maximum operating temperature of main body:140C° Max operating pressure coil : 12 Maximum operating temperature of serpentine:191C° Total Capacity 6791 liters. Capacity of serpentine: 91 liters. Year 1978 (Reconditioned in year 2001) Vessel NF 887 Serial number 712 877 MI RAPID DRYER Brand “POZZI”, 660 Kg Max operating pressure main body :5 Maximum operating temperature main boddy:120 C° Max operating pressure coil :15 Maximum operating temperature of serpentine: 200 Capacity 6587 liters TOTAL Capacity 87 liters serpentine Test Date 05/07/1980 , YEAR 1980.
Reference code:  09-0521A-05072015
 
   BABCOCK STENTER RANGE, WIDTH 2000 MM, YEAR 1992 TYPE 5000/5800
No Image
BABCOCK STENTER RANGE, WIDTH 2000 MM, YEAR 1992 TYPE 5000/5800 1 X BABCOCK IMPREGNATING /SQUEEZING PADDER, TYPE 5805, TWO BOWL (WORKING WIDTH MM.2000), STAINLESS STEEL IMPREGNATING THROUGH TWO STAINLESS STEEL EXTERNAL TANKS WITH MIXER D.C. DRIVE WITH SYNCHRONIZATION 1 X MAHLO WEFT STRAIGHTENER – TYPE RFMC –FOUR OPTICAL HEADS 1 X VACUUM EXTRACTOR WITH FILTER AND WATER RECOVERY, VACUUM PUMP WITH 30 HP POWER TO EXTRACT WATER FROM DELICATE FABRIC, BY PASSING THE SQUEEZING PADDER BABCOCK STENTER 8 CHAMBERS (TOTAL LENGTH OF THE DRYING OVEN MT.24), BLOWERS MODEL JET-STAR, WITH AIR CIRCUIT CIRCULATION, TYPE ECON-AIR POSSIBILITY TO ADJUST AIR FLOW INDEPENDENTLY UPPER AND BELOW, GAS HEATING SYSTEM WITH MAXON MODULATING BURNERS CONTROLLED BY BAELZ HEAT SETTING, HORIZONTAL PIN CHAIN, A PIN AND CLIP CHAIN IS ALSO AVAILABLE TO REPLACE THE PIN CHAIN, INLET FIELD, LENGTH.3.5 MT OVERFEEDING FOR PIN CHAIN (+50%) ENTRY WITH E+L GUIDERS MODEL KR 40 WITH FR1501 PHOTOCELL FEELER GROUP SPEED ADJUSTABLE FROM 7.5 TO 150 MT/MIN. AUTOPILOT C AUTOMATION DEVICE COOLING ZONE. TAKE OFF BY BATCHING ARM DEVICE FOR FABRIC OUTPUT ON A-FRAME TROLLEYS
Reference code:  05-0415-05062015
 
   SALVADE CURING/POLYMERIZER MACHINE FOR PIGMENT PRINTING FIXATION
No Image
SALVADE CURING/POLYMERIZER MACHINE FOR PIGMENT PRINTING FIXATION Year: 1995 Roller width: 3400mm Working width: 3200mm Fabric Content: 300 meters in Loops Exit with Batcher 380v, 50hz Inverter Control Panel.
Reference code:  09-0913-04292015
 
   CONTINUOUS DECATISER YEAR 1994
No Image
CONTINUOUS DECATISER YEAR 1994 RECONDITIONED IN 2005 BY SPEROTTO TYPE MULTIDECAT/2 WORKING WIDTH 1800MM PRE-TENSION ENTRY WITH CORINO CENTRALISING DOGAL GUIDER & PIN WHEEL WEFT STRAIGHTENER TYPE NORMATEX, WITH PLC CONTROL, PRE-STEAMING UNIT, FELT BLANKET ON A STAINLESS STEEL CYLINDER TAKE OFF BY PLAITER WITH ANTI STATIC DEVICE
Reference code:  05-0415-04282015
 
   C TEX INSPECTION & ROLLING MACHINE YEAR 1993
No Image
C TEX INSPECTION & ROLLING MACHINE YEAR 1993, WORKING WIDTH 2.000 MM BATCH TO BATCH FABRIC INSPECTION MACHINE WITH PRECISION GUIDING, TO TAKE FABRICS FROM A FRAME OR ROLLS, TO ROLLS ON CARDBOARD TUBES
Reference code:  05-0415-04282015
 
Records 1 to 28 of 28


When you click this button, the selected items will get added to your selection list and next 30 iitems will be displayed
( click here to view selected items and send them)

Copyright 2007. All Rights Reserved.